If you were added to a Rev as a Coach or you are a Rever administrator at your site, you can validate and approve those implemented Revs. The validation allows you to verify that the implementation is complete.

What do I need to validate a Rev?

  • Coaches: Can only validate the Revs where you are the Coach

  • Site administrators: Can validate all the Revs created at your Site, (It doesn't matter if you are the Coach or not)

  • The Rev should be Completed and Implemented

  • You can validate Revs from the Rever Web or Mobile version

Three different ways to access an implemented Rev as a Coach:

  1. Notifications: Once a Rev has been implemented you will receive an email notification, inside notification (bell icon on the web and mobile), or push notification (mobile). You can open the Rev and validate directly from the notification.

  2. Using filter "Coached by me" in the Stream on the Web, or go to the search of the Revs Section in Mobile

  3. Validation Section from your profile, on the Web or Mobile

Web

  • Open the implemented Rev

  • Click on the main menu

  • Start the validation by clicking on the "Validate" box

  • Done, the Rev has been Validated

  • You can enable the "Highlight" option if you wish to highlight the Rev over others

Validation Section on the Web

  1. Go to your profile

  2. Select Validations

  3. You will find a list with all the Revs to validate and those that have already been Validated

  4. Identify the Rev you want to validate and tap "Validate"

  5. Validate the Rev and close

Mobile

  • Open the implemented Rev

  • Click on the main menu

  • Select "Validate"

  • Start the validation by clicking on the "Validate" switch

  • Done, the Rev has been Validated

  • You can enable the "Highlight" option if you wish to highlight the Rev over others

Validation Section in mobile

  1. You can find the Validation section in the Home or in the main menu

  2. Click on Validations.

  3. Locate the Rev you wish to validate and tap on the "Validate" button.

  4. Once inside the Rev, verify that the implementation is correct and confirm it by activating the "Validate" switch.

Did this answer your question?